阿里[当地]软管泵-路面抛丸机您想要的我们都有

软管泵用途非常广泛，市面上的诸多场合均可适用，如：污水泵井事故清空，污水泵站事故抽空，水厂的污水池、污泥池清空。市政下水道系统的污水、污泥清空抽排。工厂、罐车事故后的油品、液体物质、化学污泥等的紧急转移；事故后地表冲洗水抽吸泵。消防应急水转移；紧急供水泵站，泵内部过流部件都可配备不锈钢，数台泵车串联使用可作为临时供水泵站。军队、海军部队战备后勤泵车。

Hose pumps are very versatile and can be applied to many occasions on the market, such as: emptying of sewage pump wells, emptying of sewage pumping stations, emptying of sewage ponds and sludge ponds in water plants. Empty sewage and sludge from municipal sewer system. Emergency transfer of oil, liquid substances, chemical sludge, etc. after the accident at factories and tankers; suction pumps for flushing water on the surface after the accident. Fire emergency water transfer; emergency water supply pump station, the internal flow parts of the pump can be equipped with stainless steel, several pump trucks in series can be used as temporary water supply pump station. Military and naval forces combat readiness logistic pump truck.

 

工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.